Wireless Buzzer System Quick Start Guide

CLICK THE IMAGE TO EXPAND

Get Started in 15 Seconds!
•Push and Hold 🔴 for 1 second
•Push EACH buzzer button once
•Press ▶️ to Start a new Round

Included in the package
•1 Remote Control
•8 Wireless Buzzers
•2 Charging Cable

Features & Notes
✔️“Random Select” Feature – Hold down the “Stop” button, press the “Start” button. All buzzers will blink randomly. Press the “Battery” button to randomly select a buzzer. Then press “Start” to reset all buzzers, or “Continue” to lock out the selected buzzer, and continue randomly selecting another buzzer.

✔️Buzzer Charging – Buzzers light up red when charging, lights turn off when charging is complete. Please charge all buzzers to full every 2 months for prolonged equipment life.

Troubleshoot Instruction
•Individual buzzers do not light up when pressed – Please make sure the buzzers are charged.
•Buzzers flash red and green – Please make sure the remote has 2-AAA batteries inserted and turned on.
•If a buzzer does not respond to the remote commands, please use “Mode” to reset the buzzer below.


“Mode” Buzzer Reset
•Make sure all buzzers are off.
•Turn on the remote and press the “Mode” button. Display will appear “0”.
•Use the “Continue” and “Mute” button to choose a buzzer serial number (1–8).
•Then press “Start”, then immediately press the buzzer 4 times rapidly.
•The buzzer will flash green to signal successfully programmed.
•Press “Mode” to exit.
•If the buzzer does not flash green or the serial number does not register, please make sure the remote and buzzer are very close together and try again.